Communications N220 Manual descarregar pdf (Página 31)

STAC5 Hardware manual

920-0026 Rev. C

9/4/2014

Mechanical Outline

Mounting the Drive

Use #6 screws to mount your drive. If possible, the drive should be securely fastened to a smooth, at metal surface that will help conduct

heat away from the chassis. If this is not possible, then forced airow from a fan may be required to prevent the drive from overheating.

• Never use your drive in a space where there is no air ﬂow or where other devices cause the surrounding air to be

more than 40°C.

• Never put the drive where it can get wet or where metal or other electrically conductive particles can get on the

circuitry.

• Always provide air ﬂow around the drive. When mounting multiple STAC5 drives near each other, maintain at

least one half inch of space between drives.

4.5

1.9

5.5

1 2 ... 26 27 28 29 30 31 32 33 34

Sem comentários

Communications N220 Manual Página 31